Check out our validated NADCAP™ processes to learn more about the specifications we meet, including: AMS 2675, AMS 2750, AMS 2759, AMS 2759/3, AMS 2759/4, AMS 2759/5, AMS 2769, AMS 2774, MS 2801, MIL-B-7883, MIL-H-6875, MIL-H-81200, and more!
Scope:
This specification, in conjunction with the general requirements for steel heat treatment covered in AMS 2759, establishes the requirements for heat treatment of martensitic corrosion-resistant steel parts. Parts are defined in AMS 2759.
Scope:
This specification, in conjunction with the general requirements for steel heat treatment covered in AMS 2759, establishes the requirements for heat treatment of precipitation-hardening corrosion-resistant and maraging steel parts. Parts are defined in AMS 2759.
Scope:
This specification, in conjunction with the general requirements for steel heat treatment covered in AMS 2759, establishes the requirements for annealing, stress relieving, and stabilizing heat treatment of austenitic corrosion-resistant steel parts. Parts are defined in AMS 2759.
Scope:
This specification, in conjunction with the general requirements for steel heat treatment covered in AMS 2759, establishes the requirements for heat treatment of martensitic corrosion-resistant steel parts. Parts are defined in AMS 2759.
This specification is applicable to parts made from the following steels: Types 403, 410, 416, 420, 422, 431, 440C, and Greek Ascoloy (UNS S40300, S41000, S41600, S42000, S42200, S43100, S44004, and S41800 respectively).
Scope:
This specification establishes the requirements and procedures for heat treating parts in a vacuum/partial pressure.
Scope:
This specification specifies the engineering requirements for heat treatment, by part fabricators (users) or their vendors or subcontractors, of parts made of cast nickel or cobalt alloys and of fabricated assemblies in which cast nickel or cobalt alloys are the primary structural components. It is not intended to provide requirements for heat treating operations that are a responsibility of the casting supplier in meeting the requirements of the casting commodity specification.
Scope:
This specification specifies the engineering requirements for heat treatment, by part fabricators (users) or their vendors or subcontractors, of parts made of wrought nickel or cobalt alloys, of raw materials during fabrication, and of fabricated assemblies in which wrought nickel or cobalt alloys are the primary structural component.
Scope:
This specification covers the engineering requirements for heat treatment by part fabricators (users) or their vendors or subcontractors, of parts made from the following titanium alloys: Commercially pure; 3AL-2.5V; 5Al-2.5Sn; 8Al-1Mo-1V; 6Al-4V; 6Al-4V(ELI); 6Al-6V-2Sn; 6Al-2Sn-4Zr-2Mo; 6Al-2Sn-4Zr-6Mo; 3Al-8V-6Cr-4Mo-4Zr; 13V-11Cr-3Al; 10V-2Fe-3Al; 15V-3Cr-3Al-3Sn.
Heat Treatment Per Customers Specification/Instruction - Call us @ 574-269-7116 or Contact Us