Nadcap™ Defense Metal Processing Treating
Nadcap Metal Processing Qualification
We take pride in our Nadcap accreditation and we know you will, too. Check out our Nadcap Accredited certifications below, such as our Scope of Accreditation for Heat Treating. Contact us today about our Nadcap™ Defense Metal Processing & Heat Treating services.
SCOPE OF ACCREDITATION Heat Treating
Expiration Date: February 28, 2026
Certificate: #4171215932
APPLIED THERMAL TECHNOLOGIES, INC
2169 N 100 E
Warsaw, Indiana 46582
This certificate expiration is updated based on periodic audits. The current expiration date and scope of accreditation are listed at: www.eAuditNet.com – Online QML (Qualified Manufacturer Listing).
In recognition of the successful completion of the PRI evaluation process, accreditation is granted to this facility to perform the following:
AC7000 – AUDIT CRITERIA FOR NADCAP ACCREDITATION
AC7101/4 Rev F – Nadcap™ Audit Criteria for Materials Testing Laboratories – Metallography and Microindentation Hardness (to be used on audits on/after 14 August 2016)*** If the Auditee holds any MTL accreditation, then this checklist must be done as part of an MTL audit
- (L0) Metallography Evaluation
- Industry Spec – Other L0
- (L1) Microindentation (Interior)
- (L10) Near Surface Examinations – Carburization/Decarburization
- (L5X) Near Surface Examinations – Microindentation (Surface) (Chord Method ARP1820)
- (L6) Near Surface Examinations – Nitriding
- (L7) Near Surface Examinations – IGA, IGO
- (L8) Near Surface Examinations – Alpha Case: Wrought Titanium
AC7102 Rev K – Nadcap™ Audit Criteria for Heat Treating Baseline (AC7102/S and AC7102/8 must also be
selected) (to be used on audits on or after 15-Aug-2021)
- Beryllium Copper – Industry Specs – Check any applicable boxes
- Brazing – AC7102/1 must also be selected
- Nickel and Cobalt Alloys – Industry Specs – Check any applicable boxes
- Industry Spec – Other – Nickel and Cobalt Alloys
- Nickel and Cobalt Alloys– Customer Specs
- Stainless Steels, Austenitic – Industry Specs – Check any applicable boxes
- Industry Spec – Other – Stainless Steels, Austenitic
- Stainless Steels, Austenitic– Customer Specs
- Stainless Steels, Martensitic – Customer Specs
- Stainless Steels, Martensitic – Industry Specs – Check any applicable boxes
- Industry Spec – Other – Stainless Steels, Martensitic
- Stainless Steels, Precipitation Hardening – Customer Specs
- Stainless Steels, Precipitation Hardening – Industry Specs – Check any applicable boxes
- Industry Spec – Other – Stainless Steels, Precipitation Hardening
- Steels – Industry Specs – Check any applicable boxes
- Stress Relieve – Customer Specs
- Stress Relieve – Industry Specs – Check any applicable boxes
- Industry Spec – Other – Stress Relieve
- Titanium Alloys – Customer Specs
- Titanium Alloys – Industry Specs – Check any applicable boxes
- Industry Spec – Other – Titanium Alloys
- Vacuum Heat Treating – Customer Specs
- Vacuum Heat Treating – Industry Specs – Check any applicable boxes
- Industry Spec – Other – Vacuum Heat Treating
AC7102S Rev J – Nadcap™ Supplemental Audit Criteria for Heat Treating (to be used on audits on/after 31 May, 2020)
- U23 Raytheon Company
- U3 Rolls–Royce
AC7102/1 Rev F – Nadcap™ Audit Criteria for Brazing (to be used on audits on/after 10 July 2016)
- Atmosphere Brazing – Customer
- Atmosphere Brazing – Industry Specs – Check any applicable boxes
- Vacuum Brazing – Customer Specs
- Vacuum Brazing – Industry Specs– Check any applicable boxes
- Industry Spec – Other
AC7102/5 Rev E – Nadcap™ Audit Criteria for Heat Treating – Hardness and/or Conductivity Testing (to be used on on/after 5 May 2019)
- Hardness – Rockwell – Check any applicable boxes
AC7102/8 Rev A – Nadcap™ Audit Criteria for Pyrometry (to be used on audits on/after 15-Aug-2021)
- Pyrometry – Customer Specs
- Pyrometry – Industry Specs – Check any applicable boxes
- AMS2750