Vacuum Brazing Applied Thermal Technologies - 2169 North 100 East - Warsaw, Indiana 46582
866-998-6029 or 574-269-7116

AMS 2759/3 - Heat Treatment–P.H. , C.R. , and Maraging Steel Parts

AMS 2759/3

Scope:
This specification, in conjunction with the general requirements for steel heat treatment covered in AMS 2759, establishes the requirements for heat treatment of precipitation-hardening corrosion-resistant and maraging steel parts. Parts are defined in AMS 2759.


Order AMS 2759 Here

Request for Quote

Meeting Validation Requirements

SPECIFIC PARTS AND/OR PROCESSES CAN BE VALIDATED BASED ON CUSTOMER REQUIREMENTS.

 

Applied Thermal Technologies has validated equipment capability to meet Customer needs including vacuum furnaces, air ovens, and validated measurement systems. Hardness testing is performed on a validated hardness tester including Installation & Operational Qualifications to insure repeatable, accurate results.

Process Performance Qualifications - Process capabilities have been validated for the full range of heat treat processes from H900 to H1150 to meet the most stringent OEM heat treat validation protocol for 17-4 SS PH, 455 SS and 465 SS materials.

Installation Qualifications - EIQs (Equipment Installation Qualifications) have been performed prerequisite to all Operationally Validated Equipment. EIQs insure proper equipment installation for functionality and safety.

Software Validations - Programming is used for each furnace control and data recording. Software for each furnace is individually validated and backed-up to insure proper operation and retention of valuable data.

Operations Qualifications - Once IQs and SVs have been completed, operational characteristic of each oven are evaluated for accuracy, consistency and repeatability to achieve operational qualification.

Our Nadcap™ Processes

Specification Title
AMS 2759 Heat Treatment of Steel Parts-General Requirements
AMS 2759/3 Heat Treatment-P.H., C.R. , and Maraging Steel Parts
AMS 2759/4 Heat Treatment-Austenitic Corrosion Resistant Steel Parts
AMS 2759/5 Heat Treatment-Martensitic Corrosion Resistant Steel Parts
AMS 2769 Heat Treatment of Parts in Vacuum
AMS 2773 Heat Treatment-Cast Nickel Alloy and Cobalt Alloy Parts
AMS 2774 Heat Treatment-Wrought Nickel Alloy and Cobalt Alloy Parts
AMS 2801 Heat Treatment of Titanium Alloy Parts
MIL-H-6875 Heat Treatment Of Steel Raw Materials
MIL-H-81200 Heat Treatment Of Titanium And Titanium Alloys
AMS 2675 Brazing, Nickel Alloy Filler Metal 
MIL-B-7883 Brazing of Steels, Copper, Copper Alloys, Nickel Alloys, Aluminum and Aluminum Alloys
Heat Treatment Per Customers Specification/Instruction
Share/Save/Bookmark